This documentation is for WSO2 Enterprise Integrator version 6.2.0 . View documentation for the latest release.

All docs This doc
Skip to end of metadata
Go to start of metadata

This section describes how to configure WSO2 Enterprise Integrator's JMS transport with HornetQ, which is an open source project to build a multi-protocol, asynchronous messaging system.

When configuring WSO2 EI's JMS transport with HornetQ, you can either configure with a standalone HornetQ server or with HornetQ embedded in a JBoss Enterprise Application Platform (JBoss EAP) server.

Go to the required tab for step by step instructions based on how you need to configure the WSO2 EI's JMS transport with HornetQ.

From the below configurations, do the ones in the axis2.xml file based on the profile you use as follows:

  • To enable the JMS transport in the Integration profile, edit the <EI_HOME>/conf/axis2/axis2.xml file.
  • To enable the JMS transport in other profiles, edit the <EI_HOME>/wso2/<PROFILE_HOME>/conf/axis2/axis2.xml file. <PROFILE_HOME> refers to the main directory of the profile inside the WSO2 EI distribution. For example, to enable the JMS transport in the Business Process profile, edit the <EI_HOME>/wso2/business-process/conf/axis2/axis2.xml file

Follow the instructions below to configure WSO2 EI JMS transport with a standalone HornetQ server.

  1. Download HornetQ from the HornetQ Downloads site.
  2. Create a sample queue by editing the <HORNET_HOME>/config/stand-alone/non-clustered/hornetq-jms.xml file as follows:

    <queue name="wso2">
          <entry name="/queue/mySampleQueue"/>
    </queue>
  3. Add the following two connection entries to the same file. These entries are required to enable WSO2 EI to act as a JMS consumer.

    <connection-factory name="QueueConnectionFactory">
          <xa>false</xa>
          <connectors>
             <connector-ref connector-name="netty"/>
          </connectors>
          <entries>
             <entry name="/QueueConnectionFactory"/>
          </entries>
    </connection-factory>
     
     
    <connection-factory name="TopicConnectionFactory">
          <xa>false</xa>
          <connectors>
             <connector-ref connector-name="netty"/>
          </connectors>
          <entries>
             <entry name="/TopicConnectionFactory"/>
          </entries>
    </connection-factory>
  4. If you have not already done so, download WSO2 EI and install as described in the Installation Guide.
  5. Download the hornet-all-new.jar file and copy it into the <EI_HOME>/lib/ directory. .

    Note

    If you are packing the JARs yourself, make sure you remove the javax.jms package from the assembled JAR to avoid the carbon runtime from picking this implementation of JMS over the bundled-in distribution.

  6. Uncomment the following line in the <EI_HOME>/conf/axis2/axis2.xml file to enable the JMS transport sender on axis2core. 

    <transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"/>
  7. Enable the JMS listener with the HornetQ configuration parameters in the <EI_HOME>/conf/axis2/axis2.xml file by un-commenting the following lines of code.

    <transportReceiver name="jms"
     class="org.apache.axis2.transport.jms.JMSListener">
     <parameter name="myTopicConnectionFactory" locked="false">
      <parameter name="java.naming.factory.initial"locked="false">org.jnp.interfaces.NamingContextFactory</parameter>
      <parameter name="java.naming.factory.url.pkgs"locked="false">org.jboss.naming:org.jnp.interfaces</parameter>
      <parameter name="java.naming.provider.url" locked="false">jnp://localhost:1099</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName"
       locked="false">TopicConnectionFactory</parameter>
      <parameter name="transport.jms.ConnectionFactoryType"
       locked="false">topic</parameter>
     </parameter>
     <parameter name="myQueueConnectionFactory" locked="false">
      <parameter name="java.naming.factory.initial"locked="false">org.jnp.interfaces.NamingContextFactory</parameter>
      <parameter name="java.naming.factory.url.pkgs"locked="false">org.jboss.naming:org.jnp.interfaces</parameter>
      <parameter name="java.naming.provider.url" locked="false">jnp://localhost:1099</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName"
       locked="false">QueueConnectionFactory</parameter>
      <parameter name="transport.jms.ConnectionFactoryType"
       locked="false">queue</parameter>
     </parameter>
     <parameter name="default" locked="false">
      <parameter name="java.naming.factory.initial"locked="false">org.jnp.interfaces.NamingContextFactory</parameter>
      <parameter name="java.naming.factory.url.pkgs"locked="false">org.jboss.naming:org.jnp.interfaces</parameter>
      <parameter name="java.naming.provider.url" locked="false">jnp://localhost:1099</parameter>
      <parameter name="transport.jms.ConnectionFactoryJNDIName"
       locked="false">QueueConnectionFactory</parameter>
      <parameter name="transport.jms.ConnectionFactoryType"
       locked="false">queue</parameter>
     </parameter>
     
    </transportReceiver>
  8. Start HornetQ with the following command.
    • On Windows: <HORNETQ_HOME>\bin\run.bat --run
    • On Linux/Solaris: sh <HORNETQ_HOME>/bin/run.sh

Now you have configured WSO2 EI's JMS transport with a standalone HornetQ server. The next section describes how you can test the configuration.

Testing the configuration

To test the configuration, we create a proxy service named JMSPublisher to publish messages from WSO2 EI to HornetQ sample queue, and create the JMSListener queue to read messages from the HornetQ sample queue. 

  1. Start the WSO2 EI management console. See Running the Product for more information.
  2. Create the JMSPublisher proxy service with the following configuration:

     <proxy xmlns="http://ws.apache.org/ns/synapse"
           name="JMSPublisher"
           transports="https,http"
           statistics="enable"
           trace="enable"
           startOnLoad="true">
       <target>
          <inSequence>
             <property name="FORCE_SC_ACCEPTED" value="true" scope="axis2"/>
             <property name="Accept-Encoding" scope="transport" action="remove"/>
             <property name="Content-Length" scope="transport" action="remove"/>
             <property name="Content-Type" scope="transport" action="remove"/>
             <property name="User-Agent" scope="transport" action="remove"/>
             <property name="OUT_ONLY" value="true"/>
             <log level="full"/>
             <send>
                <endpoint>
                   <address uri="jms:/queue/mySampleQueue?transport.jms.ConnectionFactoryJNDIName=QueueConnectionFactory&amp;java.naming.factory.initial=org.jnp.interfaces.NamingContextFactory&amp;java.naming.provider.url=jnp://localhost:1099&amp;transport.jms.DestinationType=queue"/>
                </endpoint>
             </send>
          </inSequence>
       </target>
       <publishWSDL uri="file:samples/service-bus/resources/proxy/sample_proxy_1.wsdl"/>
       <description>HornetQ-WSO2 ESB sample</description>
    </proxy>

    Note

    • The proxy service is created for the SimpleStockQuoteService service shipped with WSO2 EI samples in this example so that the configuration can be tested by sending a request to call one of the operations of the service.
    • The OUT_ONLY parameter is set to true since this proxy service is created only for the purpose of publishing the messages of WSO2 EI to the mySampleQueue queue specified in the address URI.
    • You may have to change the host name, port etc. of the JMS string based on your environment
  3. Create the JMSListener proxy service with the following configuration:

    <proxy xmlns="http://ws.apache.org/ns/synapse"
           name="JMSListener"
           transports="jms"
           statistics="disable"
           trace="disable"
           startOnLoad="true">
       <target>
          <inSequence>
             <log level="custom">
                <property name="JMS LISTENER PROXY" value="LOCATED"/>
             </log>
             <log level="full"/>
             <drop/>
          </inSequence>
       </target>
       <parameter name="transport.jms.ContentType">
          <rules>
             <jmsProperty>contentType</jmsProperty>
             <default>application/xml</default>
          </rules>
       </parameter>
       <parameter name="transport.jms.Destination">queue/mySampleQueue</parameter>
       <description/>
    </proxy>
  4. Use a client application of your choice to send a request to the endpoint of the JMSPublisher proxy service. In this example, the following request is sent using SOAPUI, calling the placeOrder operation of the SimpleStockQuoteService for which the JMSPublisher proxy service is created.

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ser="http://services.samples" xmlns:xsd="http://services.samples/xsd">
       <soapenv:Header/>
       <soapenv:Body>
          <ser:placeOrder>
             <!--Optional:-->
             <ser:order>
                <!--Optional:-->
                <xsd:price>20</xsd:price>
                <!--Optional:-->
                <xsd:quantity>20</xsd:quantity>
                <!--Optional:-->
                <xsd:symbol>IBM</xsd:symbol>
             </ser:order>
          </ser:placeOrder>
       </soapenv:Body>
    </soapenv:Envelope>
  5. Check the log on your WSO2 EI terminal.  You will see the following log, which indicates that the request published in the queue is picked by the JMSListener proxy.

    [<TIME Stamp>]  INFO - LogMediator JMS LISTENER PROXY = LOCATED
    
    [<TIME Stamp>]  INFO - LogMediator To: , WSAction: "urn:placeOrder", SOAPAction: "urn:placeOrder", MessageID: ID:be08707e-033d-11e4-8307-25263fbb9173, Direction: request, Envelope: <?xml version="1.0" encoding="utf-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><soapenv:Envelope xmlns:xsd="http://services.samples/xsd" xmlns:ser="http://services.samples"><soapenv:Body>
    
          <ser:placeOrder>
             <!--Optional:-->
             <ser:order>
                <!--Optional:-->
                <xsd:price>20</xsd:price>
                <!--Optional:-->
                <xsd:quantity>20</xsd:quantity>
                <!--Optional:-->
                <xsd:symbol>IBM</xsd:symbol>
             </ser:order>
          </ser:placeOrder>
       </soapenv:Body></soapenv:Envelope></soapenv:Body></soapenv:Envelope>

Follow the instructions below to set up and configure WSO2 EI with HornetQ embedded in a JBoss EAP server. 

Setting up JBoss EAP

This section describes the steps to install JBoss EAP server and create a message queue within the server. 

  1. Download JBoss EAP Server 7.0.0 from JBoss EAP Downloads and run the JBoss EAP installer as described here.
  2.  Execute one of the following commands in command prompt to create a new application user. 
    • On Windows: <EAP_HOME>\bin\add-user.bat -a -u 'SampleUser' -p 'SamplePwd1!' -g 'guest'
    • On Linux/Mac: <EAP_HOME>/bin/add-user.sh -a -u 'SampleUser' -p 'SamplePwd1!' -g 'guest' 
  3. Create a sample queue by editing the <EAP_HOME>/standalone/configuration/standalone-full.xml file. Add the following content within the <hornetq-server> element:

    <jms-destinations>
          <jms-queue name="sampleQueue">
              <entry name="queue/test"/>
              <entry name="java:jboss/exported/jms/queue/test"/>
          </jms-queue>
    </jms-destinations>
  4. Start the JBoss EAP server by executing one of the following commands in command prompt:
    • On Windows: <EAP_HOME>\bin\standalone.bat -c standalone-full.xml

    • On Linux/Mac: <EAP_HOME>/bin/standalone.sh -c standalone-full.xml

  5. Acess the management console of the JBoss EAP server using the following URL:
    http://127.0.0.1:9990
  6. Log in to the Management Console using admin as both the username and password. In the Profile menu, click Messaging -> Destinations and you will be able to see the queue you added in Step 4 in the Queues/Topics section. 

Now you have configured the JBoss EAP Server. The next section describes how to configure WSO2 EI to listen and fetch messages from the queue that you created above.

Configuring WSO2 EI

  1. If you have not already done so, download and install WSO2 EI.
  2. Enable the JMS listener with the JBoss EAP configuration parameters in the <EI_HOME>/conf/axis2/axis2.xml file by adding the following lines of code. 

    <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
    	<parameter name="QueueConnectionFactory" locked="false">
          		<parameter name="java.naming.factory.initial" locked="false">org.jboss.naming.remote.client.InitialContextFactory</parameter>
         		 <parameter name="java.naming.provider.url" locked="false">remote://localhost:4447</parameter>
          		<parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">jms/RemoteConnectionFactory</parameter>
          		<parameter name="transport.jms.UserName" locked="false">SampleUser</parameter>
         		<parameter name="transport.jms.Password" locked="false">SamplePwd1!</parameter>
          		<parameter name="java.naming.security.principal" locked="false">SampleUser</parameter>
          		<parameter name="java.naming.security.credentials" locked="false">SamplePwd1!</parameter>
          		<parameter name="transport.jms.ConnectionFactoryType" locked="false">queue</parameter>
    	</parameter>
    </transportReceiver>

    The username and password created for the guest user in the above section are used in the configuration.  

  3. Copy the jboss-client.jar file from the <EAP_HOME>/bin/client directory to the <EI_HOME>/lib directory.

    Note

    After copying the jboss-client.jar file from the <EAP_HOME>/bin/client directory to the <EI_HOME>/lib directory, be sure to remove the javax.jms package from the jboss-client.jar file.

  4. Enable the JMS sender by uncommenting the following line of code in the <EI_HOME>/conf/axis2/axis2.xml file.

    <transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"/> 

Now you have configured the WSO2 EI's JMS transport with HornetQ embedded in a JBoss EAP server. The next section describes how you can test the configuration.

Testing the configuration

To test the configuration we create a proxy service named JMSPublisher to publish messages from WSO2 EI to the HornetQ sample queue, and create the JMSListener queue to read messages from the HornetQ sample queue. 

  1. Start WSO2 EI management console. See Running the Product for more information.
  2. Create the JMSPublisher  proxy service with the following configuration:

    <proxy xmlns="http://ws.apache.org/ns/synapse"
           name="JMSPublisher"
           transports="https,http"
           statistics="enable"
           trace="enable"
           startOnLoad="true">
       <target>
          <inSequence>
             <property name="FORCE_SC_ACCEPTED" value="true" scope="axis2"/>
             <property name="Accept-Encoding" scope="transport" action="remove"/>
             <property name="Content-Length" scope="transport" action="remove"/>
             <property name="Content-Type" scope="transport" action="remove"/>
             <property name="User-Agent" scope="transport" action="remove"/>
             <property name="OUT_ONLY" value="true"/>
             <log level="full"/>
             <send>
                <endpoint>
                   <address uri="jms:/jms/queue/test?transport.jms.ConnectionFactoryJNDIName=jms/RemoteConnectionFactory&amp;java.naming.factory.initial=org.jboss.naming.remote.client.InitialContextFactory&amp;java.naming.provider.url=remote://localhost:4447&amp;transport.jms.DestinationType=queue&amp;transport.jms.UserName=SampleUser&amp;transport.jms.Password=SamplePwd1!&amp;java.naming.security.principal=SampleUser&amp;java.naming.security.credentials=SamplePwd1!"/>            </endpoint>
    </send>
    
          </inSequence>
       </target>
       <publishWSDL uri="file:samples/service-bus/resources/proxy/sample_proxy_1.wsdl"/>
       <description>HornetQ-WSO2 ESB sample</description>
    </proxy>

    Note

    • The proxy service is created for the SimpleStockQuoteService service shipped with WSO2 EI samples in this example so that the configuration can be tested by sending a request to call one of the operations of the service.
    • The OUT_ONLY parameter is set to true since this proxy service is created only for the purpose of publishing the messages of WSO2 EI to the mySampleQueue queue specified in the address URI.
    • You may have to change the host name, port etc. of the JMS string based on your environment
  3. Create the JMSListener proxy service with the following configuration:

    <proxy xmlns="http://ws.apache.org/ns/synapse"
           name="JMSListener"
           transports="jms"
           statistics="disable"
           trace="disable"
           startOnLoad="true">
       <target>
          <inSequence>
             <log level="custom">
                <property name="JMS LISTENER PROXY" value="LOCATED"/>
             </log>
             <log level="full"/>
             <drop/>
          </inSequence>
       </target>
       <parameter name="transport.jms.ContentType">
          <rules>
             <jmsProperty>contentType</jmsProperty>
             <default>text/plain</default>
          </rules>
       </parameter>
    <parameter name="transport.jms.ConnectionFactory">QueueConnectionFactory</parameter>
       <parameter name="transport.jms.Destination">jms/queue/test</parameter>
    <description/>
    
    </proxy>
  4. Use a client application of your choice to send a request to the endpoint of the JMSPublisher proxy service. In this example, the following request is sent using SOAPUI, calling the placeOrder operation of the SimpleStockQuoteService for which the JMSPublisher proxy service is created.

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ser="http://services.samples" xmlns:xsd="http://services.samples/xsd">
       <soapenv:Header/>
       <soapenv:Body>
          <ser:placeOrder>
             <!--Optional:-->
             <ser:order>
                <!--Optional:-->
                <xsd:price>20</xsd:price>
                <!--Optional:-->
                <xsd:quantity>20</xsd:quantity>
                <!--Optional:-->
                <xsd:symbol>IBM</xsd:symbol>
             </ser:order>
          </ser:placeOrder>
       </soapenv:Body>
    </soapenv:Envelope>
  5. Check the log on your WSO2 EI terminal.  You will see the following log, which indicates that the request published in the queue is picked by the JMSListener proxy.

    [<TIME Stamp>]  INFO - LogMediator JMS LISTENER PROXY = LOCATED
    
    [<TIME Stamp>]  INFO - LogMediator To: , WSAction: "urn:placeOrder", SOAPAction: "urn:placeOrder", MessageID: ID:be08707e-033d-11e4-8307-25263fbb9173, Direction: request, Envelope: <?xml version="1.0" encoding="utf-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><soapenv:Envelope xmlns:xsd="http://services.samples/xsd" xmlns:ser="http://services.samples"><soapenv:Body>
    
          <ser:placeOrder>
             <!--Optional:-->
             <ser:order>
                <!--Optional:-->
                <xsd:price>20</xsd:price>
                <!--Optional:-->
                <xsd:quantity>20</xsd:quantity>
                <!--Optional:-->
                <xsd:symbol>IBM</xsd:symbol>
             </ser:order>
          </ser:placeOrder>
       </soapenv:Body></soapenv:Envelope></soapenv:Body></soapenv:Envelope>
  • No labels