- Expand the SAML2 Web SSO Configuration and click Configure.
- Select one of the following modes:
Metadata and URL configuration
When configuring a service provider (SP) or a federated identity provider (Federated IdP), the user is required to enter configuration data to facilitate exchanging authentication and authorization data between entities in a standard way. Apart from manual entering of configuration data, WSO2 IS allows you to upload configuration data using a metadata XML file or refer to a metadata XML file located in a predetermined URL. These two methods of uploading configuration data enable faster entry of configuration data because it allows the user to use the same metadata xml file for multiple instances of entity configuration. In addition to SAML metadata upload, WSO2 IS also supports SAML metadata download for the resident identity provider.
- Select Manual Configuration and fill in the form that appears.
- Click Register.
The following points should be taken into consideration when filling the above New Service Provider form.
|Issuer||Specify the Issuer. This is the ||travelocity.com|
Service Provider Qualifier
To configure Service Provider Qualifier described below, apply the 5083 WUM update to WSO2 IS 5.7.0 using the WSO2 Update Manager (WUM). To deploy a WUM update into production, you need to have a paid subscription. If you do not have a paid subscription, you can use this feature with the next version of WSO2 Identity Server when it is released. For more information on updating WSO2 Identity Server using WUM, see Getting Started with WUM in the WSO2 Administration Guide.
This value is needed only if you have to configure multiple SAML SSO inbound authentication configurations for the same Issuer value. When a Service Provider Qualifier is defined here, it will be appended to the end of the Issuer value when registering the SAML SP in the Identity Server.
You can configure a number of SAML SPs with the same Issuer and different Service Provider Qualifiers.
When a Service Provider Qualifier is defined, the issuer of the SAML SSO authentication request is the value specified as the Issuer in the configuration (ex : travelocity.com). The service provider qualifier value should be sent as a query parameter, spQualifier with the HTTP request in the following format.
In Travelocity sample SP, this query parameter can be set by modifying
|Assertion Consumer URLs||Specify the Assertion Consumer URLs. This is the URL to which the browser should be redirected to after the authentication is successful. This is the Assertion Consumer Service (ACS) URL of the service provider. The identity provider redirects the SAML2 response to this ACS URL. However, if the SAML2 request is signed and SAML2 request contains the ACS URL, the Identity Server will honor the ACS URL of the SAML2 request. It should have this format: https://(host-name):(port)/acs. You can add multiple assertion consumer URLs for the service provider by entering the URL and clicking the Add button.||http://wso2is.local:8080/travelocity.com/home.jsp|
|Default Assertion Consumer URL|
Since there can be multiple assertion consumer URLs, you must define a Default Assertion Consumer URL in case you are unable to retrieve it from the authentication request.
Tip: In a service provider initiated single sign-on setup, the following needs to be considered.
In an identity provider initiated single sign-on setup, the following needs to be considered.
Specify the NameID format. This defines the name identifier formats supported by the identity provider. The service provider and identity provider usually communicate with each other regarding a specific subject. That subject should be identified through a Name-Identifier (NameID) , which should be in some format so that It is easy for the other party to identify it based on the format. Name identifiers are used to provide information regarding a user.
About NameID formats
For SSO interactions, you can use the following types of NameID formats.
This specifies the name identifier format that the Identity Server wants to receive in the subject of an assertion from a particular identity provider. The following is the default format used by the identity provider.
Select the Certificate Alias from the dropdown. This is used to validate the signature of SAML2 requests and is used to generate encryption. Basically the service provider’s certificate must be selected here. Note that this can also be the Identity Server tenant's public certificate in a scenario where you are doing a tenant specific configuration.
From WSO2 IS 5.5.0 onwards, the .pem certificate can be updated via the Service Provider screen in the management console UI using the Application Certificate field. If the certificate has been entered in the Application Certifiate field, the system will use the certificate given there and override the certificate alias field.
However, if the Application Certificate field has been left blank, the certificate specified in Certificate Alias will be used.
|Response Signing Algorithm|
Specifies the ‘SignatureMethod’ algorithm to be used in the ‘Signature’ element in POST binding. The default value can be configured in the
|Response Digest Algorithm|
Specifies the ‘DigestMethod’ algorithm to be used in the ‘Signature’ element in POST binding. The default value can be configured in the
|Assertion Encryption Algorithm||The algorithm that the SAML2 assertion is encrypted. The default value can be configured in the ||www.w3.org/2001/04/xmlenc#aes256-cbc|
|Key Encryption Algorithm||The algorithm that the SAML2 key is encrypted. The default value can be configured in the ||www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p|
|Enable Response Signing||Select Enable Response Signing to sign the SAML2 Responses returned after the authentication process.||Selected|
|Enable Signature Validation in Authentication Requests and Logout Requests||Select Enable Signature Validation in Authentication Requests and Logout Requests if you need this functionality configured. This specifies whether the identity provider must validate the signature of the SAML2 authentication request and the SAML2 logout request that are sent by the service provider.||Unselected|
|Enable Assertion Encryption||Enable Assertion Encryption, if you wish to encrypt the assertion.||Unselected|
|Enable Single Logout|
Select Enable Single Logout so that all sessions are terminated once the user signs out from one server. If single logout is enabled, the identity provider sends logout requests to all service providers. Basically, the identity provider acts according to the single logout profile. If the service provider supports a different URL for logout, you can enter a SLO Response URL and SLO Request URL for logging out. These URLs indicate where the request and response should go to. If you do not specify this URL, the identity provider uses the Assertion Consumer Service (ACS) URL.
To configure SAML Back-Channel Logout and SAML Front-Channel Logout described below, apply the 4062 WUM update to WSO2 IS 5.7.0 using the WSO2 Update Manager (WUM). To deploy a WUM update into production, you need to have a paid subscription. If you do not have a paid subscription, you can use this feature with the next version of WSO2 Identity Server when it is released. For more information on updating WSO2 Identity Server using WUM, see Getting Started with WUM in the WSO2 Administration Guide.
WSO2 Identity Server supports both SAML Back-Channel Logout and SAML Front-Channel Logout methods. By default, when you select Enable Single Logout the Back-Channel Logout is enabled. In order to enable SAML Front-Channel Logout, you can either select Front-Channel Logout (HTTP Redirect Binding) or Front-Channel Logout (HTTP POST Binding).
|Enable Attribute Profile||Select Enable Attribute Profile to enable this and add a claim by entering the claim link and clicking the Add Claim button. The Identity Server provides support for a basic attribute profile where the identity provider can include the user’s attributes in the SAML Assertions as part of the attribute statement. Once you select the checkbox to Include Attributes in the Response Always, the identity provider always includes the attribute values related to the selected claims in the SAML attribute statement.||Unselected|
|Enable Audience Restriction||Select Enable Audience Restriction to restrict the audience. You may add audience members using the Audience text box and clicking the Add button.||Unselected|
|Enable Recipient Validation||Select this if you require validation from the recipient of the response.||Unselected|
|Enable IdP Initiated SSO||Select the Enable IdP Initiated SSO checkbox to enable this functionality. When this is enabled, the service provider is not required to send the SAML2 request.||Unselected|
|Enable IdP Initiated SLO||Select the Enable IdP Initiated SLO checkbox to enable this functionality. You must specify the URL.||Unselected|
|Enable Assertion Query Request Profile||Select the Enable Assertion Query Request Profile checkbox to query assertions that are persisted to the database when you login to the service provider application. For more information, see Querying SAML Assertions.||Unselected|
|IdP Entity ID Alias|
To configure IdP Entity ID Alias described below, apply the 5083 WUM update to WSO2 IS 5.7.0 using the WSO2 Update Manager (WUM). To deploy a WUM update into production, you need to have a paid subscription. If you do not have a paid subscription, you can use this feature with the next version of WSO2 Identity Server when it is released. For more information on updating WSO2 Identity Server using WUM, see Getting Started with WUM in the WSO2 Administration Guide.
This value can override the value of Identity Provider Entity ID specified under SAML SSO Inbound Authentication configuration in Resident IdP. The Identity Provider Entity ID is used as the issuer of the SAML responses generated from IS. By default, all the SAML responses issued by IS will have the issuer value similar to the Identity Provider Entity ID in Resident IdP’s SAML SSO inbound authentication configuration. But if you want that value to be unique for your SAML SP configuration, you can specify the value here, so that the IdP Entity ID will be overridden with this IdP Entity ID Alias value.
In Travelocity sample SP, this value can be set by modifying SAML2.IdPEntityId value mentioned in the travelocity.com/WEB-INF/classes/travelocity.properties file, so that it reflects the value of the IdP Entity ID Alias you define in the SAML SP configuration.
|any valid URL/URI|
Metadata file configuration
This option allows you to provide the configuration data required for configuring SAML2, by uploading a metadata .xml file instead of having to manually enter the values. This enables faster entry of configuration data and allows the user to use the same metadata XML file for multiple instances of entity configuration.
- Select Metadata File Configuration.
- Click Choose File, and select the .xml file containing the metadata for the service provider SAML configuration.
From WSO2 IS 5.5.0 onwards, the certificate can be added via the Service Providers screen in the management console UI using the Application Certificate field. This means that certificates can now be directly added along with the service provider instead of having to import the certificate to the keystore and referring to it using the Certificate Alias field.
Therefore, when uploading a metadata file, the Application Certificate field in the Service Providers screen will automatically display the certificate that is embedded in the metatdata file. You can update or edit the certificate by editing the content within the Application Certificate field and uploading the metadata file again will override the existing certificate.Click here to view a sample of the metadata configuration file
Metadata for a service provider may be published in a well known location via a URI. This option allows you to provide the configuration data required for configuring SAML2, by providing a URI(Ex: " instead of having to manually enter the values. This enables faster entry of configuration data and allows the user to use the same metadata XML file for multiple instances of entity configuration. ")
- Select URL Configuration and enter the URL containing the service provider metadata.
- Click Upload.
- Click here to expand for more information on signature algorithms.
The following table provides the list of signature algorithms available and their respective URI.
Signature algorithm name Signature algorithm URI DSA with SHA1 ECDSA with SHA1 ECDSA with SHA256 ECDSA with SHA384 ECDSA with SHA512 RSA with MD5 RSA with RIPEMD160 RSA with SHA1 RSA with SHA256 RSA with SHA384 RSA with SHA512
- Click here to expand for more information on digest algorithms.
The following table provides the list of digest algorithms available and their respective URI.
Digest algorithm name Digest algorithm URI MD5 RIPEMD160 SHA1 SHA256 SHA384 SHA512
If you need to sign the SAML response using an authenticated user's tenant keystore, please add the following configuration. (By default, the response is signed using the certificate that belongs to the tenant where the service provider is registered). This property must be added if the SAML authenticator version in the WSO2 Carbon products that you are using is 4.2.2 or higher (
<UseAuthenticatedUserDomainCrypto>property available in the
<IS_HOME>/repository/conf/identity.xmlfile as shown below.